(0 item) - $0.00

You have no items in your shopping cart.

 

1 x 600 Watt 2 Ohm Class D Audio Amplifier Board - TAS5630 Zoom

1 x 600 Watt 2 Ohm Class D Audio Amplifier Board - TAS5630

Be the first to review this product

SKU: AA-AB31241
Welcome to use this 1 x 600W Class-D audio amplifier board series by Sure Electronics.It integrates TI’s high performance TAS5630 supporting single channel audio amplification. Single channel is capable of outputting nominal power simultaneously and continuously. It’s suitable for amplifier enthusiasts or hobbyists to finish a complete amplifier system.Amplifiers this powerful used to take up as much room and generate as much heat as a space heater! Up to 600W of pure Class-D power is on tap and ready for you to use this amplifier board with the meanest subwoofer you can find.

Availability: In stock

$59.90
  • Buy 4 for $56.91 each and save 5%
  • Buy 12 for $50.92 each and save 15%
  • Buy 24 for $47.92 each and save 20%

With this product, you earn 60 loyalty point(s). 60 points = $0.60.

Product Description

    Details


    1 X 600Watt 2 Ohm Class D Audio Amplifier Board - TAS5630  


    Warranty


    Overview:

    Welcome to use this 1 x 600W Class-D audio amplifier board series by Sure Electronics. 

    It integrates TI’s high performance TAS5630 supporting single channel audio amplification.

    Single channel is capable of outputting nominal power simultaneously and continuously. It’s 

    subtable for amplifier enthusiasts or hobbyists to finish a complete amplifier system. Resistance

    and capacity components of high quality, including X7R ceramic capacitors, Metallized Polyester 

    (PET) Capacitors and lower ESR electrolytic capacitors, high performance inductors are used  to 

    gain the perfect timber, finally realize high S/N ratio, low THD+N, wide frequency response range etc

    Arobust heatsink, two-stage cooling fan, as well as protection circuits to protect againstover/under

    voltage, over current, short circuit, and over temperature conditions are built-in for years of

    enjoyment. Four fixed gain settings allow you to match the amplifier to your source, and use your

    source as the volume control. A 25 to 50 VDC power supply is required.

    Features:

    • Output Power 
                      600W@2Ohm 48V DC THD+N 10%
                      350W@2Ohm 48V DC THD+N 1%
    • Power and Shutdown Indicator
    • Support Volume Control Board
    • PBTL Architecture
    • Temperature Control Fan(optional)
    • Full Protection
    • Optimized Heatsink Design
    • 4-screw Easy Installation
    • Weight:538g/1.19 lbs (±10%)
    • Size:6.00inchX4.50inchX1.53inch

    Application:

    • Home theater receiver
    • Car audio
    • Background music systems
    • Musical instrument amplifiers
    • Prototype for recording studios, Post-production, Live sound and Hi-Fi applications 

    Electrical Specifications:

    Specifications typical @ +25℃, Powered by 48V DC, unless otherwise noted. Specifications subject 

    to change without notice.

    Parameter

    Conditions

    Min.

    Typ.

     Max.

    Units

    Power Supply

    -

    25

    48

    -

    VDC

    Idle Power

    SD Floating, FAN ON

    -

    6

    9

    W

    SD Floating, FAN OFF

    -

    4.9

    8

    W

    Standby Power

    SD Connected to GND, FAN OFF

    -

    1

    3

    W

    Maximum Current 

    600W @ 2Ohm 

    -

    13.5

    -

    A

    Efficiency

    600W @ 2Ohm 

    90

    -

    95

    %

    Minimum Load Impedance

    -

    -

    1.5

    -

    Ω

    Switching Frequency

    SD Floating

    -

     390

    -

    KHz

    Fan Active @ Temperature

    -

    -

    50

    -

     

    Audio Performance:

    Specifications typical @ +25℃, Powered by 48V DC, unless otherwise noted. Specifications subject 

    to change without notice.

    Parameter

    Conditions

    Min.

    Typ.

    Max.

    Units

    Gain

    K1 ON ,K2 ON  GAIN 23dB

    -

    23

    -

    dB

    K1 ON ,K2 OFF GAIN 29dB

    -

    29

    -

    dB

    K1 OFF, K2 ON GAIN 33dB 

    -

    33

    -

    dB

    K1 OFF, K2 OFF GAIN 35dB

    -

    35

    -

    dB

    Input Sensitivity(RMS)

    GAIN 23dB

    -

    3.5

    4.6

    V

    GAIN 29dB

    -

    1.7

    2.2

    V

    GAIN 33dB

    -

    1.1

    1.4

    V

    GAIN 35dB

    -

    0.9

    1.2

    V

    Input Impedance

    -

    13

    -

    16.7

    Output Power

    @2Ω THD+N 1%

    -

    350

    -

    W

    @2Ω THD+N 10%

    -

    600

    -

    W

    Bandwidth @ ±3dB

    @2Ω

    20

    -

    20K

       Hz

    THD

    @2Ω, 10W, 1KHz

    -

    0.056

    0.1

    %

    @2Ω, 50W, 1KHz

    -

    0.103

    0.2

    %

    Output Noise Level

    A-weighting,Input Connected to GND       

    -

    255

    510

    µV

    SNR

    350W @2Ω THD+N 1%

    -

    94

    96

    dB

     

    Typical Performance Graphs:

    Frequency response:

     

    Noise Floor:

    THD+N VS Frequency:

     

    Thermal Image:

    All parameters were tested with Rohde & Schwarz UPV audio analyzer and AP AUX0025 filter with AES17 filter enabled.

    Connection:

     

     Model Selection Guide:

    Model Number

    Output Power

    Power Supply
    Range

    Typical  
    Load

    Amplifier
    IC

    Dimensions

    AA-AB31184

    1 X 100Watt

    DC 10-24V

    TPA3116

     3.6"X2.7"#1

    AA-AB31371

    1 X 220Watt

    DC 15-36V

    TDA7498E

     4.8"X3.6"#2 

    AA-AB31282

    1 X 200Watt 

    DC 15-36V

    T-AMP

    4.8"X3.6"

    AA-AB31194

    1 X 300Watt

    DC 15-40V

    T-AMP

    4.8"X3.6"

    AA-AB31315

    1 X 400Watt 

    DC 15-44V

    T-AMP

    4.8"X3.6"

    AA-AB31511

    1 X 500Watt 

    DC 15-50V

    T-AMP

    4.8"X3.6"

    AA-AB31243

    1 X 600Watt

    DC 25-48V

    TAS5630B

    4.8"X3.6"

    AA-AB31191

    1 X 300Watt

    DC 20-36V

    TAS5613

     6"X4.5"#3 

    AA-AB31241

    1 X 600Watt

    DC 25-48V

    TAS5630B

    6"X4.5"

    AA-AB31316

    1 X 400Watt 

    DC 15-36V

    1.5Ω

    T-AMP

    6"X4.5"

    AA-AB31513

    1 X 500Watt 

    DC 15-40V

    1.5Ω

    T-AMP

    6"X4.5"

    AA-AB31242

    1 X 600Watt 

    DC 15-40V

    1.5Ω

    T-AMP

    6"X4.5"

    AA-AB31321

    1 X 800Watt 

    DC 15-46V

    1.5Ω

    T-AMP

    6"X4.5"

    AA-AB31512

    1 X 500Watt

    DC ±55-±65V

    IRS2092

    6"X4.5"

    AA-AB31431

    1 X 750Watt

    DC ±55-±75V

    IRS2092

    6"X4.5"

     Kindly Note:The Red marked products will be soon released. 

    Optional Accessries:

    Volume Control:

     

    Bluetooth Audio Receiver Board:

    Power Supply:

    PS-SP11142 Mean Well MW 48V 12.5A 600W AC/DC Switching Power Supply SE-600-48 UL/CUL PSU

    Package include:

    1 X 600W Class D Audio Amplifier Board x 1 

Additional Information

    Additional Information

    UPC No
Product's Review

    Write Your Own Review

    You're reviewing: 1 x 600 Watt 2 Ohm Class D Audio Amplifier Board - TAS5630

Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab