(0 item) - $0.00

You have no items in your shopping cart.

 

2 x 300 Watt 4 Ohm Class D Audio Amplifier Board - TAS5630 Zoom

2 x 300 Watt 4 Ohm Class D Audio Amplifier Board - TAS5630

Be the first to review this product

SKU: AA-AB32191
Here comes upgrade version of the original 2 X 300 watt class D audio amplifier board.
This amplifier board supports stereo amplification by using two channel PBTL topology.
By means of dedicated heat sink design with temperature controlled fan,it is capable of delivering dual channel maximum power300W RMS @ 4ohm simultaneously without extraordinary heat sink.

Availability: In stock

$64.90
  • Buy 4 for $61.66 each and save 5%
  • Buy 12 for $55.17 each and save 15%
  • Buy 24 for $51.92 each and save 20%

With this product, you earn 65 loyalty point(s). 65 points = $0.65.

Product Description

    Details

     
    2 x 300 Watt 4 Ohm Class D Audio Amplifier Board - TAS5630  

    Manual: AA-AB32191

    Warranty

    Overview:

    Here comes upgrade version of the original 2 X 300 Watt class D audio amplifier board T-Amp technology.

    Hear your music like never before with 300 Watts per channel of audiophile-grade Tripath Class-T technology. Amp includes a quiet running fan to keep things cool.

    This amplifier board supports stereo (dual) amplification by using two channel PBTL topology.

    By means of dedicated heat sink design with temperature controlled fan,it is capable of delivering dual channel maximum power 300W RMS @ 4ohm simultaneously without extraordinary heat sink.

    Besides of built-in chip protection, ESD and spike protection components used throughout input and output of the amplifier board ensure its robustness and reliability.

    A low noise, temperature controlled, cooling fan is mounted atop the robust heatsink to maximize heat dissipation. Thermal, over/under voltage, and current protection circuits are also included to extend the longevity of the amplifier board. Mounting holes are provided as is a 2.5 mm x 5.5 mm power jack for quick connection. Screw-down phoenix-type terminals are included for quick speaker wire connection. RCA line-level inputs are pre-attached to make this board ready to rock.

    Features:

    • Gain adjustable
    • Under voltage protection
    • Over current protection
    • Short circuit and over temperature protectionRobust heatsink with two-stage cooling fan
    • Pre-drilled mounting holes
    • Over/under voltage, over current, short circuit, and over temperature protection circuits
    • Click and pop noise reduction
    • Phoenix-type speaker terminals
    • Two line-level RCA inputs
    Applications:
    • Home theater receiver 
    • Car audio 
    • Background music systems 
    • Musical instrument amplifiers 
    • Prototype for recording studios, Post-production, Live sound and Hi-Fi applications 
    • PA system
     
    Electrical Specification: 

    Specifications typical @ +25℃, Powered by 48V DC, unless otherwise noted. Specifications 

    subject to change without notice.

    Parameter

    Conditions

    Min.

    Typ.

     Max.

    Units

    Power Supply

    -

    24

    48

    50

    VDC

    Idle Power

    SD Floating, FAN ON

    -

    6.5

    15

    W

    SD Floating, FAN OFF

    -

    5

    10

    W

    Maximum Current 

    600W @ 4Ohm 

    -

    13.9

    -

    A

    Efficiency

    300W @ 4Ohm 

    86

    -

    91

    %

    Minimum Load Impedance

    -

    -

    3.5

    -

    Ω

    Switching Frequency

    SD Floating

    -

    400

    -

    KHz

    Fan Active @ Temperature

    -

    -

    50

    -

     
    Audio Specification:
     
    Specifications typical @ +25℃, Powered by 48V DC, unless otherwise noted. Specifications 
    subject to change without notice.
     

    Parameter

    Conditions

    Min.

    Typ.

    Max.

    Units

    Gain

    K1 ON, K2 ON

    -

    24

    -

    dB

    K1 OFF, K2 ON

    -

    30

    -

    dB

    K1 ON, K2 OFF

    -

    34

    -

    dB

    K1 OFF, K2 OFF

    -

    36

    -

    dB

    Input Sensitivity(RMS)

    @4Ω,300W,1KHz

    -

    1.05

    -

    V

    Input Impedance

    -

    -

    13

    16.7

    Output Power

    @4Ω THD+N 1%

    -

    166

    -

    W

    @4Ω THD+N 10%

    -

    300

    -

    W

    Bandwidth @ ±3dB

    @4Ω

    20

    -

    20K

       Hz

    THD

    @4Ω, 1W, 1KHz

    -

    0.017

    -

    %

    @4Ω, 10W, 1KHz

    -

    0.03

    -

    %

    Output Noise Level

    A-weighting,Input Connected to GND       

    -

    244

    -

    µV

    SNR

    166W @4Ω THD+N 1%

    -

    99

    -

    dB

     
    Typical Performance Graphs:
     
    Frequency response:
    Noise Floor:
    THD+N VS Frequency:
    Thermal Image:
    All parameters were tested with Rohde & Schwarz UPV audio analyzer and AP AUX0025 filter with AES17 filter enabled.
     
    Connections:
    Model Selection Guide:

    Model Number

    Output Power

    Power Supply
    Range

    Typical  
    Load

    Amplifier
    IC

    Dimensions

    AA-AB32189

    2 X 100Watt

    DC 15-36V

    TDA7498

     4.8"X3.6"#1

    AA-AB32361

    2 X 160Watt

    DC 15-36V

    TDA7498E

    4.8"X3.6"

    AA-AB32971

    2 X 100Watt

    DC 15-27V

    T-AMP

    4.8"X3.6"

    AA-AB32281

    2 X 200Watt

    DC 15-36V

    T-AMP

    4.8"X3.6"

    AA-AB32195

    2 X 300Watt

    DC 15-40V

    T-AMP

    4.8"X3.6"

    AA-AB32313

    2 X 400Watt

    DC 15-48V

    T-AMP

    4.8"X3.6"

    AA-AB32512

    2 X 500Watt

    DC 25-50V

    T-AMP

    4.8"X3.6"

    AA-AB32192

    2 X 300Watt

    DC 25-48V

    TAS5630B

    4.8"X3.6"

    AA-AB32221

    2 X 150Watt

    DC 20-36V

    TAS5613

    6"X4.5"#2

    AA-AB32191

    2 X 300Watt

    DC 25-52V

    TAS5630B

    6"X4.5"

    AA-AB32196

    2 X 300Watt

    DC 24-40V

    T-AMP

    6"X4.5"

    AA-AB32314

    2 X 400Watt

    DC 24-44V

    T-AMP

    6"X4.5"

    AA-AB32514

    2 X 500Watt

    DC 24-50V

    T-AMP

    6"X4.5"

    AA-AB32432

    2 X 750Watt

    DC 60-80V

    T-AMP

    6"X4.5"

    AA-AB32321

    2 X 125Watt

    DC ±45-±60V

    IRS2092

    6"X4.5"

    AA-AB32291

    2 X 250Watt

    DC ±60-±80V

    IRS2092

    6"X4.5"

    AA-AB32511

    2 X 500Watt

    DC ±55-±65V

    IRS2092

    6"X9"#3

    AA-AB32431

    2 X 750Watt

    DC ±55-±75V

    IRS2092

    6"X9"

    Kindly Note:The Red marked products will be soon released.
     
    Optional Accessries:
     
    Volume Control:
     
    Bluetooth Audio Receiver Board:
     
     
    Power Supply:
     
     
    Frequently Bought Together:
     
     
    Content:
    2 x 300 Watt 4 Ohm Class D Audio Amplifier Board x 1
     
Additional Information

    Additional Information

    UPC No
Product's Review

    Write Your Own Review

    You're reviewing: 2 x 300 Watt 4 Ohm Class D Audio Amplifier Board - TAS5630

Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab

You may also be interested in the following product(s)