(0 item) - $0.00

You have no items in your shopping cart.

 

CSR8670 APT-X Bluetooth 4.0 Audio Receiver Board Wireless Stereo 12V BRB4 Car Zoom

CSR8670 APT-X Bluetooth 4.0 Audio Receiver Board Wireless Stereo 12V BRB4 Car

Be the first to review this product

SKU: AA-AB41155
High Sound Quality
Fully Digital Solution Available
PIN Code Customizable (Optional)
Bluetooth Pairing Name Customizable
External Bu�on Control (Optional)
For Wireless Speaker, Game Machine,
Portble Bluetooth Speaker, Jukebox,
Recrea�onal Vehicle, Yatch, Hotel, Hospital,
Consumer Audio Applica�ons, etc.

Availability: In stock

$24.90

With this product, you earn 25 loyalty point(s). 25 points = $0.25.

Product Description

    Details

     

    CSR8670 APT-X Bluetooth V4.0 Audio Receiver Board Wireless Stereo 12V - BRB4 Car

     

    Brief Introduction:

    High Sound Quality  BRB is a highly reliable analog and digital output Bluetooth Receiver Board series and the entire series supplies different six models with high sound quality that can satisfy the demands for various customers.
    BRB series can offer such exceptional audio fidelity, with low noise and low distortion, at very compettive costs. With supreme features like signal loop and components optimzation during design and measurement,we can provide better sound quality products, with higher SNR and lower THD+N with same DAC.

     

    Features:

    • 3.6 x 2.7 Inches PCB Size
    • Bluetooth V4.0 +EDR, A2DP
    • Single Ended Audio Signal Output
    • 2.54mm 4Pin Joint Wire Output (Optional)
    • Control Buttons (External Buttons Support)
    • (Prev/ Next/ Volume Up/ Volume Down/ Play/ Pause)
    • External Bluetooth Antenna Available
    • (I-PEX Micro RF Coax Connector)
    • External LED Indicator Support
    • Digital Signal Recovery Circuit
    • Bluetooth Name Customizable
     
    Applications:
    • Desktop Wireless Music Receiver
    • Wireless audio source for amplifiers
    • Wireless headphone driver (HP amp needed to use with some headphones)

     

     

    Benefits

    High Sound Quality

    BRB is a highly reliable analog and digital output Bluetooth Receiver Board series and the entire series supplies different six models with high sound quality that can satisfy the demands for various customers. BRB series can offer such exceptional audio fidelity, with low noise and low distortion, at very competitive costs. With supreme features like signal loop and components optimzation during design and measurement,we can provide better sound quality products, with higher SNR and lower THD+N with same DAC.

    Ready for BQB, APT-X, CE and FCC

    Bluetooth receiver boards belong to electronic components instead of assets. Thereby FCC and CE certifications are not necessarily needed since the FCC and CE certification are directed at final products with enclosure. To simplify customers’ task of achieving certifications for your final product, we have done the pre-test for EMC part in the laboratory, saving much of your valuable time and costs, but we didn't issue the paper certification. The final equipment must be re-confirmed that it still meets EMC directives.

    Easy for Integration

    Bluetooth receiver boards come with various terminals for multiple output methods, 3.5mm jack and RCA jack for analog signal (For all BRBs) and I2S and S/ PDIF for digital signal (Only apply to BRB5), which makes it convenient for customers to integrate the Bluetooth receiver board into their applications, saving much development costs and time. Customers could also extend the bluetooth receiving distance by an external Bluetooth antenna, which is attached in the package of BRB4, BRB5 and BRB6 and for BRB3 can be realized through the socket on board (Not apply to BRB1 and BRB2).Choosing a Bluetooth receiver board for product develpoment will save huge maintenance costs and time because of the reliable quality of BRB series, ensuring them stable in customers’ system with low repair rate .BRB series has three dimensions, perfectly satisfying different requirements of customers for different applications. To improve the connection and measurement efficiency and save customers’ cost on installations, Sure Electronics also provides a L-style aluminium bracket for BRB series. The aluminium bracket supports vertical and horizontal installtion ways to meet different installation requirements. With 4 pieces M3 screw lock standoffs and 2 pieces M3 pre-drilled mounting holes, the Bluetooth receiver boards could be installed on the bracket easily.

    Voice Customisable in Factory

    This function is only available on Bluetooth V2.1 Audio Receiver Board Starter - BRB1 (AA-AB41151). MOQ 100 pieces will be requested. Customer could send us a .wav file and it could be set as boot music and prompt tone for Bluetooth paring, disconnection, power off and low power. File size could not exceed 248kb. This service will cost $0.99 for each. If the order quantity is more than 500pcs, this service will be free.

    Bluetooth Pairing Name Programming

    Sure Electronics offers three methods to program Bluetooth pairing name for customers. Customer could pay US$0.99 for each module and send the Paring Name to store@sure-electronics.com for confirmation. Be very careful about special character and space. Serial Number for each module is acceptable. Or customer could program the Bluetooth pairing name by themselves with a PIC KIT 3 programmer or a USB to Serial adapterMethod 11. Send the Pairing Name by email to store@sure-electronics.com for confirmation.
    2. Select the Bluetooth Pairing Name Programming drop-down list on Bluetooth receiver board product description page.
    Please note: For order quantity less than 100pcs, this service will cost $0.99 for each, no MOQ. If the subtotal of an order is more than $1000, or quantity is more than 100pcs, this service will be free. Customers could use any Bluetooth Pairing  Name, and must send the Pairing Name by email to store@sure-electronics.com for confirmation. Be very careful about special character and space. Serial Number for each module is acceptable.Method 2. (This function is only available on BRB5.)1. Choosing a PIC KIT 3 for Bluetooth pairing name programming.
    2. Installing the software (for more detailed information, please refer to PIC KIT 3 user manual)
    3. Connecting the Bluetooth receiver board
    3.1. Plug in the USB/ power cable
    3.2. Attach the communication cable(s) between programmer and Bluetooth receiver board if using RJ11 plug or connect directly to a 6-pin inline header.
    4. Settings
    4.1. Under Device Family -> Midrange -> Standard.
    4.2. From Device drop down select “PICF16F690”.
    4.3. From Tools drop down select “Check Communication”.
    4.4. Settings as shown in red area in Figure 3-5:
    Uncheck the “Hex only” under Program Memory. 
    Under EEPROM Data:
    Enable the Byte ASCII.
    Change the first data to 00 on “00” line.
    Bluetooth pairing name: “08” and “10” lines
    PIN Code: “18” and “20” lines 
    Translate your pairing name and PIN code into 
    ASCII, for example, “87 79 78 68 79 77” refer to 
    “WONDOM”

    Method 3. (This function is only available on BRB5)

    1. Choosing a USB to Serial adapter for Bluetooth pairing name programming.
    2. Connecting the Bluetooth receiver board
    3.1. Plug in the USB/ power cable
    3.2. Attach the communication cable(s) between programmer and Bluetooth receiver board if using RJ11 plug or connect directly to a 6-pin inline header.
    4. Settings
    4.1. Double click “Hyper terminal” application and creat a new connection, for ex. “BT_COM”.
    4.2. Open device manager and check for a new assigned COM port.
    4.3. From Connect using drop down select the new assigned COM port.
    4.4. From Bits per second drop down select 115200.
    4.5. Under File -> Properies -> Setting -> ASCII SetupEnable “Echo typed character locally”. Click “OK” to finish the settng.
    4.6. Enter “BPN: xxxxx” to program your unquie pairing name and “BPC: xxxxx” to set your Bluetooth PIN code.

    Button Control 
    (Apply to BRB4, BRB5 and BRB6)

    BRB series provides a convenient media control way for all customers through 5 control buttons on board, realizing the functions of play, pause, volume up, volume down, pervious track and next track (Apply to BRB4, BRB5 and BRB6). 
    There is a 8-pin PH terminal on BRB4, BRB5 and BRB6 specially designed for customers who want external buttons of media control through a 8-pin cable. For industrial customers who may need external panel of these buttons, Sure Electronics can also provide matched solutions for you. Please contact us at store@sure-electronics.com if you have any requirements.

    Fully Digital Solutton Available

    Sure Electronics provides a fully digital solution, using direct digital output from Bluetooth chipset, and using a clock recovery chip to output the S/PDIF signal through both TOSLINK and Coaxial port. Some versions have been built in high sound quality DAC which use PCM1794 from Texas Instruments, to provide best sound quality in Bluetooth solutions.

    5 Years Product Life
    Sure Electronics guarantees at least 5 years PLC (Product Life Cycle) to our customers, this means, once products are launched to the market, you can place order and get technical support from Sure Electronics and Sure Electronics' 
    distributors within 5 years. For any halt production caused by the discontinued core materials, Sure Electronics will provide full pin to pin, screw to screw compatible solutions for you to ensure you a smooth Production Transition.


    Zero Stock for Customers
    To meet our customers requirement in Just - In - Time manufacturing, Zero Stock policy, Sure Electroincs always 
    provides enough stock. For most audio products, Sure Electronics always keeps more than 1,000pcs stock, and for 
    best sellers, we keep more than 3,000pcs. That means Sure Electronics keeps about 100k pcs circuit boards in 
    stock at any time. That is true. In our Nanjing Stock, we have more than 80 CBM of finished products, and more 
    than 100 CBM for half finished products, which are turning in very fast cycles. We can ship more than 98% 
    requriements of our standard products - that is amazing, right?

    Disclaimers

    Accessories and Connectors Declaration

    4 pieces M3 screw lock standoffs and 2 pieces M3 pre-drilled mounting holes are attached with L-style aluminium 
    bracket package.
    An extensional Bluetooth antenna with adhesive tape is attached with BRB3, BRB4, BRB5 and BRB6 standard 
    package. Sure Electronics won’t tear off adhesive tape on the back of Bluetooth antenna under any circumstanc-
    es. 
    For different customer’s application requirements, RCA connectors won’t be installed on board in advance. But 
    current products in stock might have been pre-installed. Any pre-installed RCA connectors on PCB will NOT be the 
    reason for return or rejection.

     

     Model Selection Guide

     

    Notes: • means this function is available. - means this function is not available.
    Sure Electronics provide following customized services:
    Bluetooth Paring Name. This is applicable to all models. PIN Code. This only applies to BRB5. (Please send e-mails to store@sure-electronics.com for confirmation before purchasing.)Boot Music. This only applies to BRB1.

    Basic Parameters:

     

     

    Package content:

    • CSR8670 APT-X Bluetooth V4.0 Audio Receiver Board Wireless Stereo 12V - BRB4 Car  x 1 
    1
    New layer...
    New layer...
    New layer...
    .
    New layer...
    New layer...
    New layer...
Additional Information

    Additional Information

    UPC No
Product's Review

    Write Your Own Review

    You're reviewing: CSR8670 APT-X Bluetooth 4.0 Audio Receiver Board Wireless Stereo 12V BRB4 Car

Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab