(0 item) - $0.00

You have no items in your shopping cart.

 

Hantek DSO5102B Digital Oscilloscope 100MHz 1Gs LCD 7"TFT USB Lab v TEK TDS1012B Zoom

Hantek DSO5102B Digital Oscilloscope 100MHz 1Gs LCD 7"TFT USB Lab v TEK TDS1012B

Be the first to review this product

SKU: DC-OT11173
Hantek DSO5102B Digital Oscilloscope 100MHz 1Gs LCD 7"TFT USB Lab v TEK TDS1012B

Availability: In stock

$374.90

With this product, you earn 375 loyalty point(s). 375 points = $3.75.

Product Description

    Details

    Hantek DSO5102B Digital Oscilloscope 100MHz 1Gs LCD 7"TFT USB Lab v TEK TDS1012B
    Product Detail

    Features:

    • 200/100/60MHz bandwidths

    • 1GSa/s Real Time sample rate

    • Large (7.0-inch) color display,WVGA(800x480)

    • Record length up to 1M

    • Trigger mode: edge/pulse width/line sel ectable video/slop/overtime etc.

    • USB host and device connectivity, standard

    • Multiple automatic measurements

    • Four math functions, including FFTs standard

    • Provides software for PC real-time analysis

    Hardware Specification:

     

    Model DSO5202B DSO5102B DSO5062B
    Bandwidth 200MHz 100MHz 60MHz
    Real-time Sample Rate 1GSa/s
    Equivalent Sample Rate 25GSa/s
    Record Length(Sample Points) Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K,16K,40K optional)
    SEC/DIV Range 4nS/div-40S/div (in a 2, 4, 8 sequence)
    Delay Time Accuracy 500ps
    Vertical
    A/D Converter 8-bit resolution, each channel sampled simultaneously
    VOLTS/DIV Range 2mV/div~5V/div at input BNC
    Position Range ±50V(5V/div),±40V(2V/div~500mV/div),2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div)
    Rise Time at BNC ≤1.7ns ≤3.5ns ≤5.8ns
    DC Gain Accuracy ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
    ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
    Trigger
    Trigger Sensitivity
    (Edge Trigger Type)
    DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
    EXT(Typical) 200mV from DC to 40MHz
    EXT/5(Typical) 1V from DC to 40MHz 
    AC: Attenuates signals below 10HzHF Reject: Attenuates signals above 80kHzLF Reject: Attenuates signals below 150kHzNoise Reject: Reduces trigger sensitivity
    Trigger Level Range CH1,CH2: ±8 divisions from center of screen
    EXT: ±1.2V EXT/5: ±6V
    Trigger Level Accuracy,
    typical (Accuracy is for signals having rise and fall times ≥20ns)
    CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
    EXT: ±(6% of setting + 40mV)
    EXT/5: ±(6% of setting + 200mV)
    Holdoff Range 100ns-10s
    Trigger Type
    Edge Trigger on the rising or falling edge
    Pulse Width Trigger (when >,<,=,≠) on positive or negative pulses
    Pulse Width Range: 20ns-10s
    Video Trigger on an NTSC, PAL, or SECAM standard video signal
    Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
    Slope Trigger (when >,<,=,≠) on a positive or negative slope
    Set Time: 20ns–10s
    Overtime from the rising or falling edge
    Set Time: 20-10s
    Alternate Internal trigger on edge, pulse width, video or slope
    Measurement
    Cursors Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz.
    Tracing: The voltage and time at a waveform point
    Automatic(32) Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH、FRF、FFR、LRR、LRF、LFR、LFF
    Display
    Type Right angle 7"TFT 16-digit color LCD
    Resolution 800*480 dots
    Contrast 16 gears, with the progress bar to show adjustment
    Interface USB host and USB slave
    Power Supply
    Voltage 100-120VACRMS(±10%),45Hz to 440Hz,CATⅡ
    120-240VACRMS(±10%),45Hz to 66Hz,CATⅡ
    Power <30W
    Fuse 2A, T rating, 250V
    Mechanical
    Size Length: 313mm Width: 108mm Height: 142mm
    Weight 2.08KG (exclusive of packing and accessories)

     

    Software:
    Operating system: Windows 7, Windows NT, Windows 2000, Windows XP ,VISTA 
Additional Information

    Additional Information

    UPC No
Product's Review

    Write Your Own Review

    You're reviewing: Hantek DSO5102B Digital Oscilloscope 100MHz 1Gs LCD 7"TFT USB Lab v TEK TDS1012B

Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab

You may also be interested in the following product(s)