(0 item) - $0.00

You have no items in your shopping cart.

 

Hantek DSO5202B 200MHz 2Channel 1GS/s Oscilloscope Scopemeter USB Zoom

Hantek DSO5202B 200MHz 2Channel 1GS/s Oscilloscope Scopemeter USB

Be the first to review this product

SKU: DC-OT11241
Hantek DSO5202B 200MHz 2Channel 1GS/s Oscilloscope Scopemeter USB

Availability: In stock

$423.40

With this product, you earn 424 loyalty point(s). 424 points = $4.24.

Product Description

    Details

     

     

    Hantek DSO5202B 200MHz 2 Channel 1GS/s Oscilloscope Scopemeter USB


    We Offer EXPRESS Service On This Item.

    Introduction 

    This Versatile Bench-top Oscilloscope has a 200 MHz bandwidth, 2 channel Input. The digital storage oscilloscope has a 1 GSa/s sample rate. Its Extra Large 7.0 inch, 16 color TFT-LCD screen with 800x480 resolution makes it stands out against its rivals. The unit comes with 2 passive probes that are switchable between 1:1 and 10:1 input ratio. Also included is a USB cable, a power adapter, and a CD that contains the manual and software to interface the unit with a Windows PC.

    Features:

    • 200/100/60MHz bandwidths
    •1GSa/s Real Time sample rate
    • Large (7.0-inch) color display,WVGA(800x480)

    • Record length up to 1M
    • Trigger mode: edge/pulse width/line sel ectable video/slop/overtime etc.
    • USB host and device connectivity, standard
    • Multiple automatic measurements
    • Four math functions, including FFTs standard

    • Provides software for PC real-time analysis

    Model

    DSO5202B

    DSO5102B

    DSO5062B

    Bandwidth

    200MHz

    100MHz

    60MHz

    Real-time Sample Rate

    1GSa/s

    Equivalent Sample Rate

    25GSa/s

    Record Length(Sample Points)

    Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K,16K,40K optional)

    SEC/DIV Range

    4nS/div-40S/div (in a 2, 4, 8 sequence)

    Delay Time Accuracy

    500ps

    Vertical

    A/D Converter

    8-bit resolution, each channel sampled simultaneously

    VOLTS/DIV Range

    2mV/div~5V/div at input BNC

    Position Range

    ±50V(5V/div),±40V(2V/div~500mV/div),2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div)

    Bandwidth Limit

    20MHz

    Rise Time at BNC

    ≤1.7ns

    ≤3.5ns

    ≤5.8ns

    DC Gain Accuracy

    ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
    ±3% for Sample or Average acquisition mode, 5V/div to 10mV/div

    Trigger

    Trigger Sensitivity
    (Edge Trigger Type)

    DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
    EXT(Typical) 200mV from DC to 40MHz
    EXT/5(Typical) 1V from DC to 40MHz
    AC: Attenuates signals below 10Hz

    HF Reject: Attenuates signals above 80kHz

    LF Reject: Attenuates signals below 150kHz

    Noise Reject: Reduces trigger sensitivity

    Trigger Level Range

    CH1,CH2: ±8 divisions from center of screen
    EXT: ±1.2V EXT/5: ±6V

    Trigger Level Accuracy,
    typical (Accuracy is for signals having rise and fall times ≥20ns)

    CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
    EXT: ±(6% of setting + 40mV)
    EXT/5: ±(6% of setting + 200mV)

    Holdoff Range

    100ns-10s

    Trigger Type

    Edge

    Trigger on the rising or falling edge

    Pulse Width

    Trigger (when >,<,=,≠) on positive or negative pulses
    Pulse Width Range: 20ns-10s

    Video

    Trigger on an NTSC, PAL, or SECAM standard video signal
    Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)

    Slope

    Trigger (when >,<,=,≠) on a positive or negative slope
    Set Time: 20ns–10s

    Overtime

    from the rising or falling edge
    Set Time: 20-10s

    Alternate

    Internal trigger on edge, pulse width, video or slope

    Measurement

    Cursors

    Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz.
    Tracing: The voltage and time at a waveform point

    Automatic

    Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width

    Display

    Type

    Right angle 7"TFT 16-digit color LCD

    Resolution

    800*480 dots

    Contrast

    16 gears, with the progress bar to show adjustment

    Interface

    USB host and USB slave

    Power Supply

    Voltage

    100-120VACRMS(±10%),45Hz to 440Hz,CATⅡ
    120-240VACRMS(±10%),45Hz to 66Hz,CATⅡ

    Power

    <30W

    Fuse

    2A, T rating, 250V

    Mechanical

    Size

    Length: 313mm Width: 108mm Height: 142mm

    Weight

    2.08KG (exclusive of packing and accessories)

     Software:

     Operating system: Windows NT, Windows 2000, Windows XP ,VISTA

     Accessories Content:

    • 1 Hantek DSO5202B Digital Oscilloscopes
    • 1 USB Cable
    • 1 Power Cord
    • 2 Probles
Additional Information

    Additional Information

    UPC No
Product's Review

    Write Your Own Review

    You're reviewing: Hantek DSO5202B 200MHz 2Channel 1GS/s Oscilloscope Scopemeter USB

Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab

You may also be interested in the following product(s)