Maynuo M9811 Programmable DC Electronic Load LED Power Driver Test 150V 30A 200W

Product Description

Details

[zipedit]



---

 

Maynuo M9811 Programmable DC Electronic Load Power Driver Test 

 

Note:

There are two working voltage that powers the DC load: either 110V or 220V. Please make sure the right voltage setting has been selected manually for your area. You can set the voltage through the switch in the backside.




Features:

•  Six high speed operation modes: CC,CR,CV,CW,CC+CV,CR+CW
•  Over current, over voltage, over power, over heat, polarity reversed protection
•  High-luminance VFD screen with two lines& four channels display
•  Intellegent fan system fan will be automatically initiated according to the temperature
•  Soft start time setting, carrying the power supplier according to the voltage value set
•  Battery testing and short-circuit function
•  Available of dynamic testing and rising edge and falling edge setting
•  Supporting external trigger input and output
•  External current waveform monitor terminal
•  Supporting remote voltage compensation and multidata storage
•  Power-on-self-test, software calibration and standard rack mount
•  LED mode for LED power driver test, steaday reading, compatable with simulating the 
  capacitances sensitive driver
•  Arbitrary waveform editing in list function
•  Communication mode: RS232/RS485/USB.

 

Application: 

• Production line(cell phone charger, cell phone battery, electric vehicle battery, switchingpower supplier, linear power supplier, LED driver)
• research insititutes
• automotive electronics
• aeronautics
• astronautics
• ships
• solar cells fule cell

Specification: 

Model	M9811
Input Rating	Power	200W
	Current	0-30A
	Voltage	0-150V
CC Mode	Range	0-3A	0-30A
	Resolution	0.1mA	1mA
	Accuracy	0.03%+0.05%FS	0.03%+0.05%FS
CV Mode	Range	0.1-19.999V	0.1-150V
	Resolution	1mV	10mV
	Accuracy	0.03%+0.02%FS	0.03%+0.02%FS
CR Mode   (Voltage and  current input value  >=10% full  measurement)	Range	0.03-10K Oh	0.03-5K Oh
	Resolution	16 bit	16 bit
	Accuracy	0.1%+0.1%FS	0.1%+0.1%FS
CW Mode   (Voltage and current  input value >=10% full  measurement)	Range	0-200W	0-200W
	Resolution	1mW	10mW
	Accuracy	0.1%+0.1%FS	0.1%+0.1%FS
Voltage Measurement	Voltage	0-19.999V	0-150V
	Resolution	1mV	10mV
	Accuracy	0.015%+0.03%FS	0.015%+0.03%FS
Current Measurement	Current	0-3A	0-30A
	Resolution	0.01mA	0.1mA
	Accuracy	0.03%+0.05%FS	0.03%+0.08%FS
Power Measurement (Voltage and current  input value >=10% full  measurement)	Power	100W	200W
	Resolution	1mW	10mW
	Accuracy	0.1%+0.1%FS	0.1%+0.1%FS
Battery Test	Battery Input: 0.1-150V;  Max. Mesurement:Capacity=999AH;   Resolution=0.1mA;       Test Range=1S-16H
Dynamic Test	Transition List:0-25kHZ; 2.5A/uS; T1&T2:60uS-999S; Accuracy:+15% offset+10%FS
Current soft-startup  Time	1mS;2mS;5mS;10mS;20mS;50mS;100mS;200mS;500mS;1000mS            Accuracy:+15% offset+10%FS
LED Test	Press shift+ button to enter Led test. Repeat to escape the LED test. A 'D'  character shows  on lower right of the display in the LED test.
Short Circuit	Current(CC)	=3.3A	=33A
	Voltage(CV)	0V
	Resistance(CR)	=55mOh
Temperature	Operating	0~40oC
	Nonoperating	-10oC~70oC
Dimension	W*H*D(mm)	214*108*365
Weight	Kg	3.5

 

 Package content:

Maynuo M9811 Programmable DC Electronic Load x1

Additional Information

Additional Information

UPC	No

Product's Review

Write Your Own Review

You're reviewing: Maynuo M9811 Programmable DC Electronic Load LED Power Driver Test 150V 30A 200W

• *Nickname
• *Summary of Your Review
• *Review

Submit Review

Product Tags

Add Your Tags:

Add Tags

Use spaces to separate tags. Use single quotes (') for phrases.

CMS tab