Product Description
- Output Power
- Power and Shutdown Indicator
- Full Protection
- Optimized Heatsink Design
- 4-screw Easy Installation
- Weight:580g/1.28 lbs (±10%)
- Size:6.00inchX4.50inchX2.90inch
- Home theater receiver
- Car audio
- Background music systems
- Musical instrument amplifiers
- Prototype for recording studios, Post-production, Live sound and Hi-Fi applications
Details
Overview:
This audio amplifier board employs IR's High Voltage, high performance class D audio amplifier
driver IRS2092SPBF and 200V Single N-Channel HEXFET Power MOSFET IRFB4227.
This amplifier board supports mono amplification by using one channel half bridge topology.
By means of dedicated heatsink design with temperature controlled fan,it is capable of delivering
maximum power 500W RMS @ 4ohm without extraordinary heatsink.
Besides of built-in chip protection, ESD and spike protection components used throughout input and
output of the amplifier board ensure its robustness and reliability.
Features:
405W@ 4Ohm ±60V DC THD+N 1%
Application:
Electrical Specifications:
Specifications typical @ +25℃, Powered by
±60V DC, unless otherwise noted. Specifications subject to change without notice.
Parameter |
Conditions |
Min. |
Typ. |
Max. |
Units |
Power Supply |
- |
±55 |
±60 |
±65 |
VDC |
Idle Power |
SD Floating, FAN ON |
- |
4.5 |
7 |
W |
SD Floating, FAN OFF |
- |
3 |
5 |
W |
|
Standby Power |
SD Connected to GND, FAN OFF |
- |
0.6 |
3 |
W |
Maximum Current |
500W @ 4 Ohm |
- |
9.1 |
- |
A |
Efficiency |
500W @ 4 Ohm |
88 |
- |
93 |
% |
Minimum Load Impedance |
- |
- |
3 |
- |
Ω |
Switching Frequency |
SD Floating |
- |
396 |
- |
KHz |
Under Voltage Production |
- |
- |
±50 |
- |
V |
Over Voltage Production |
- |
- |
±72 |
- |
V |
Over Temperature Production |
- |
- |
100 |
- |
℃ |
Fan Active @ Temperature |
- |
- |
55 |
- |
℃ |
Audio Performance:
Specifications typical @ +25℃, Powered by ±60V DC, unless otherwise noted. Specifications subject to change without notice.
Parameter |
Conditions |
Min. |
Typ. |
Max. |
Units |
Gain |
- |
28 |
30 |
32 |
dB |
Input Sensitivity(RMS) |
@4 Ohm, 500W, 1KHz |
- |
1.44 |
- |
V |
Input Impedance |
- |
- |
3.3 |
- |
KΩ |
Output Power |
@4 Ohm, THD+N 1% |
- |
405 |
- |
W |
@4 Ohm, THD+N 10% |
- |
500 |
- |
W |
|
Bandwidth @ ±3dB |
@4 Ohm |
20 |
- |
20K |
Hz |
THD |
@4 Ohm, 1W, 1KHz |
- |
0.03 |
- |
% |
@4 Ohm, 10W, 1KHz |
- |
0.04 |
- |
% |
|
Output Noise Level |
A-weighting, Input Connected to GND |
- |
262 |
- |
µV |
SNR |
405W @ 4 Ohm, THD+N 1% |
- |
98 |
- |
dB |
Typical Performance Graphs:
Frequency response:
Noise Floor:
THD+N VS Frequency:
Thermal Image:
All parameters were tested with Rohde & Schwarz UPV audio analyzer and AP AUX0025 filter with AES17 filter enabled.
Connection:
Model Selection Guide:
Model Number |
Output Power |
Power Supply |
Typical |
Amplifier |
Dimensions |
1 X 100Watt |
DC 10-24V |
2Ω |
TPA3116 |
3.6"X2.7"#1 |
|
AA-AB31371 |
1 X 220Watt |
DC 15-36V |
4Ω |
TDA7498E |
4.8"X3.6"#2 |
1 X 200Watt |
DC 15-36V |
3Ω |
T-AMP |
4.8"X3.6" |
|
1 X 300Watt |
DC 15-40V |
3Ω |
T-AMP |
4.8"X3.6" |
|
1 X 400Watt |
DC 15-44V |
3Ω |
T-AMP |
4.8"X3.6" |
|
1 X 500Watt |
DC 15-50V |
3Ω |
T-AMP |
4.8"X3.6" |
|
AA-AB31243 |
1 X 600Watt |
DC 25-48V |
2Ω |
TAS5630B |
4.8"X3.6" |
1 X 300Watt |
DC 20-36V |
2Ω |
TAS5613 |
6"X4.5"#3 |
|
1 X 600Watt |
DC 25-48V |
2Ω |
TAS5630B |
6"X4.5" |
|
AA-AB31316 |
1 X 400Watt |
DC 15-36V |
1.5Ω |
T-AMP |
6"X4.5" |
1 X 500Watt |
DC 15-40V |
1.5Ω |
T-AMP |
6"X4.5" |
|
1 X 600Watt |
DC 15-40V |
1.5Ω |
T-AMP |
6"X4.5" |
|
1 X 800Watt |
DC 15-46V |
1.5Ω |
T-AMP |
6"X4.5" |
|
1 X 500Watt |
DC ±55-±65V |
4Ω |
IRS2092 |
6"X4.5" |
|
1 X 750Watt |
DC ±55-±75V |
4Ω |
IRS2092 |
6"X4.5" |
Kindly Note:The Red marked products will be soon released.
Optional Accessries:
Volume Control:
Bluetooth Audio Receiver Board:
Package include:
1 x 500W Class D Audio Amplifier Board x 1
Additional Information
Additional Information
UPC | No |
---|