Product Description
- Mounting holes on Heat Sink are specially designed for LEDs in our store. We shall not be liable for any consequences if you install other LEDs into our Heat Sink.
- Do not directly touch the surface of the Heat Sink while it has been working for a long time.
- We suggest operating temperature of LEDs below 60℃. It will affect the service lifetime of LEDs or even be burned when operating temperature above 60℃. Before light your LED, you can put your finger on the Heat Sink (in the case of cold surface). When the Heat Sink is too hot to touch,It means your LED can’t be used with this Heat Sink.
- Aluminum Alloy,oxidation technology
- Exquisite workmanship,good heat dissipation
- 17xM3 mounting holes
- Handled angle, safety, beautiful appearance
- Dimension: 60x80x50mm / 2.35x2.35x1.95inch
- Gross Weight: 150g (5.29oz)
- Cooling for LED lamp
- Heat Sink for 1W 3W 5W 10W LED × 1
- M3 Screw × 4
- M3 Screw will be possibly attached to your parcel according to our stock, but not necessarily. M3 Screw might be a little different from what you've seen on webpage since it might be from different batch. However, it won't affect your use. Sure Electronics assumes no liability for any ambiguity caused by the product photos
Details
Heat Sink for 1W 3W 5W 10W LED（DC-HS11131）
The size of the heatsink (mm/inch):
The net weight of the heatsink (g):
Notice:
Brief Introduction:
This is an aluminum heat sink which can be used with 1W,3W,5W 10W LEDs.A free accessory kit
is provided for easy installation.You may use an external fan if you want a better heat dissipation.
Features:
Specification:
Applications：
Test:
Schematic(mm):
Corresponding Images:
Package Included:
Note:
LED Series Product Selection Guide:
Additional Information
Additional Information
| UPC | No |
|---|
